The purpose of this ISG is to address the design and testing of the various closure welds (“lid
welds”) associated with the redundant closure of all-welded austenitic stainless steel canisters:

As an acceptable confinement boundary under 10 CFR Part 72.236(e) (Ref. 1) for
purposes of demonstrating no credible leakage of radioactive material during storage
and satisfying the dose limits under normal and off-normal conditions in 10 CFR Parts
72.104(a) and 72.106(b).

The closure weld for the outer cover plate for austenitic stainless steel designs may be
inspected using either volumetric or multiple pass dye penetrant techniques subject to the
following conditions:
• Dye penetrant (PT) examination may only be used in lieu of volumetric
examination only on austenitic stainless steels. PT examination should be done
in accordance with ASME Section V, Article 6, “Liquid Penetrant Examination.”
• For either ultrasonic examination (UT) or PT examination, the minimum