Category of Content
Siting Experience Documents Only
Publication Date
Subject Matter
Keywords
Waste Package Probabilistic Criticality Analysis: Summary Report of Evaluations in 1997
Waste Package Probabilistic Criticality Analysis: Summary Report of Evaluations in 1997
The emplacement of nuclear waste in the proposed geologic repository must satisfy relevant regulatory requirements with respect to criticality, 10CFR60. I31 (h) (Ref. 25). The waste packages for the various waste forms will be designed to preclude criticality (typically by the inclusion of neutron absorbers) even if the waste package becomes filled with water. Criticality may, however, be possible if the contents of the waste package become degraded in such a way that the fissile material can be separated from the neutron absorbers, while sufficient moderator is retained.
External Criticality Risk of Immobilized Plutonium Waste Form in a Geologic Repository
External Criticality Risk of Immobilized Plutonium Waste Form in a Geologic Repository
This technical report provides an updated summary of the waste package (WP) external criticalityrelated
risk of the plutonium disposition ceramic waste form, which is being developed and
evaluated by the Office of Fissile Materials Disposition of the U.S. Department of Energy (DOE).
The ceramic waste form consists of Pu immobilized in ceramic disks, which would be embedded
in High-Level Waste (HLW) glass in the HLW glass disposal canisters, known as the "can-incanister"
THE REPORT TO THE PRESIDENT AND THE CONGRESS BY THE SECRETARY OF ENERGY ON THE NEED FOR A SECOND REPOSITORY
THE REPORT TO THE PRESIDENT AND THE CONGRESS BY THE SECRETARY OF ENERGY ON THE NEED FOR A SECOND REPOSITORY
The Nuclear Waste Policy Act of 1982, as amended (NWPA), establishes a process for the siting, construction and operation of one or more national repositories for permanent disposal of the Nation’s spent nuclear fuel (SNF) and high-level radioactive waste (HLW). In 1987, after the Department of Energy (the Department or DOE) had conducted studies of nine potential repository sites located throughout the United States, Congress amended the NWPA and selected the Yucca Mountain site in Nye County, Nevada as the only site for further study for the first national repository.
slides - Potential Improvements to the Licensing Process for a Recycling Plant
slides - Potential Improvements to the Licensing Process for a Recycling Plant
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
Slides - Status Update: Extended Storage and Transportation Waste Confidence
Slides - Status Update: Extended Storage and Transportation Waste Confidence
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
slides - GC-859 Pilot Program Update
slides - GC-859 Pilot Program Update
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
slides - DOE Nuclear Fuel Storage and Transportation (NFST) Planning Project: System Analysis and Integration Activities
slides - DOE Nuclear Fuel Storage and Transportation (NFST) Planning Project: System Analysis and Integration Activities
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
Preclosure Consequence Analyses
Preclosure Consequence Analyses
The purpose of this calculation is to demonstrate that the preclosure performance objectives specified in 10 CFR 63.111(a) and 10 CFR 63.111(b) (Reference 2.2.1) have been met for the proposed design and operations in the geologic repository operations area (GROA) during normal operations and Category 1 event sequences, and following Category 2 event sequences. Category 1 event sequences are those natural and human-induced event sequences that are expected to occur one or more times before permanent closure of the repository.
Evaluation of Waste Stream Receipt Scenarios for Repository Loading
Evaluation of Waste Stream Receipt Scenarios for Repository Loading
The purpose of this calculation is to simulate the processing of an incoming waste stream into waste packages, simulating the required aging as applicable, and the emplacement of the waste packages into the Yucca Mountain repository.
slides - Observations on Key Storage and Transport Technical Issues
slides - Observations on Key Storage and Transport Technical Issues
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
slides - EPRI High Burnup Used Fuel Confirmatory Demonstration Project [The "High Burnup Demo"]
slides - EPRI High Burnup Used Fuel Confirmatory Demonstration Project [The "High Burnup Demo"]
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
slides - Minimum Critical Volume
slides - Minimum Critical Volume
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
Cladding Degradation Summary for LA
Cladding Degradation Summary for LA
The purpose of this analysis report is to develop the summary cladding degradation abstraction that will be used in the Total System Performance Assessment for the License Application (TSPA-LA). Most civilian commercial nuclear fuel is encased in Zircaloy cladding. The analysis addressed in this report is intended to describe the postulated condition of commercial Zircaloy-clad fuel as a function of postclosure time after it is placed in the repository.
Soil-Related Input Parameters for the Biosphere Model
Soil-Related Input Parameters for the Biosphere Model
This report presents one of the analyses that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), referred to in this report as the biosphere model. Biosphere Model Report (BSC 2004 [DIRS 169460]) describes the details of the conceptual and mathematical biosphere models and the required input parameters. The biosphere model is one of a series of process models supporting the postclosure total system performance assessment (TSPA) for the Yucca Mountain repository.
slides - Nuclear Generation Event Response: Strengthening Safety After Fukushima
slides - Nuclear Generation Event Response: Strengthening Safety After Fukushima
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
Calibrated Unsaturated Zone Properties
Calibrated Unsaturated Zone Properties
The purpose of this report is to document the calibrated property sets for unsaturated zone (UZ) flow and transport process models (UZ models). The calibration of the property sets is performed through inverse modeling using a previously validated model. This work followed, and was planned in Technical Work Plan for: Unsaturated Zone Flow, Drift Seepage and Unsaturated Zone Transport Modeling (BSC 2006 [DIRS 177465], Sections 1 and 2.1.2).
EQ6 calculations for Chemical Degradation of Navy Waste Packages
EQ6 calculations for Chemical Degradation of Navy Waste Packages
The Monitored Geologic Repository Waste Package Operations of the Civilian Radioactive Waste Management System Management & Operating Contractor (CRWMS M&O) performed calculations to provide input for disposal of spent nuclear fuel (SNF) from the Navy (Refs. 1 and , 2). The Navy SNF has been considered for disposal at the potential Yucca Mountain site. For some waste packages, the containment may breach (Ref. 3), allowing the influx of water. Water in the waste package may moderate neutrons, increasing the likelihood of a criticality event within the waste package.
slides - ISFSI Security Rulemaking Update
slides - ISFSI Security Rulemaking Update
Presented at the NEI Used Fuel Management Conference, St. Petersburg, FL, May 7-9, 2013
Waste Package Filler Material Testing Report
Waste Package Filler Material Testing Report
As part of the Mined Geologic Disposal System Waste Package Development design activities, it has been determined that it may be beneficial to add material to fill the otherwise free spaces remaining in waste package after loading high-level nuclear waste. The use of filler material will benefit criticality control in spent nuclear fuel waste packages, by the moderator displacement method.
Features, Events, and Processes for the Total System Performance Assessment: Analyses
Features, Events, and Processes for the Total System Performance Assessment: Analyses
The purpose of this analysis report is to document the screening decisions and technical bases for inclusion or exclusion of each FEP identified as relevant to the TSPA and the Yucca Mountain disposal system, in accordance with the regulatory screening criteria identified for the Yucca Mountain Site.
Waste Package Misload Probability
Waste Package Misload Probability
The objective of this calculation is to calculate the probability of occurrence for fuel assembly (FA) misloads (i.e., FA placed in the wrong location) and FA damage during FA movements. The scope of this calculation is provided by the information obtained from the Framatome ANP 2001a report. The first step in this calculation is to categorize each fuel-handling event that occurred at nuclear power plants. The different categories are based on FAs being damaged or misloaded. The next step is to determine the total number of FAs involved in the event.
Disposal Criticality Analysis Methodology Technical report
Disposal Criticality Analysis Methodology Technical report
The United States Department of Energy (DOE) is developing a postclosure methodology for criticality analysis to evaluate disposal of commercial spent nuclear fuel and other high-level waste in a geologic repository. A topical report on the postclosure disposal criticality analysis methodology is scheduled to be submitted to the United States Nuclear Regulatory Commission (NRC) for formal review in 1998 (to be verified). This technical report is being issued to describe the current status of the postclosure methodology development effort.
Nuclear Waste Policy Act of 1982
Nuclear Waste Policy Act of 1982
An Act to provide for the development of repositories for the disposal of high-level radioactive waste and spent nuclear fuel, to establish a program of research, de- velopment, and demonstration regarding the disposal of high-level radioactive waste and spent nuclear fuel, and for other purposes.
Analysis of Mechanisms for Early Waste Package / Drip Shield Failure
Analysis of Mechanisms for Early Waste Package / Drip Shield Failure
The purpose of this analysis is to evaluate the types of defects or imperfections that could occur in a waste package or a drip shield and potentially lead to its early failure, and to estimate a probability of undetected occurrence for each type. An early failure is defined as the through-wall penetration of a waste package or drip shield due to manufacturing or handling-induced defects, at a time earlier than would be predicted by mechanistic degradation models for a defect-free waste package or drip shield.