Category of Content

Siting Experience Documents Only

Publication Date

Keywords

Displaying 1 - 5 of 5

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

Author(s)
Nouri, A.
Publication Date
The OECD/NEA “Burn-up Credit Criticality Benchmark” working group has studied the effect of axial burn-up profile on the criticality of a realistic PWR spent fuel transport cask (Phase II-B). The final results of this benchmark are presented and analysed in this report. Nine basic cases and two additional accident configurations were considered with the following varying parameters: burn-up (0 GWd/t for fresh fuel, 30 and 50 GWd/t), fuel composition (actinides only and actinides with fifteen fission products), axial burn-up discretisation (1 or 9 zones).
criticality pwr fuel transport cask end effect source convergence burnup axial burnup profile

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
DOE
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle benchmarks used fuel

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
Office of Civilian Radioactive Waste Management
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data benchmark safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle used fuel

U.S. Regulatory Recommendations for Actinide-Only Burnup Credit in Transport and Storage Casks

U.S. Regulatory Recommendations for Actinide-Only Burnup Credit in Transport and Storage Casks

Author(s)
Withee, C. J. ,
Wagner, J. C. ,
Parks, C. V.
Publication Date

In July 1999, the U.S. Nuclear Regulatory Commission (NRC) Spent Fuel Project Office
(SFPO) issued Interim Staff Guidance 8 Revision 1 (ISG8R1) to provide recommendations for the use
of burnup credit in storage and transport of pressurized-water reactor (PWR) spent fuel. Subsequent to
the issuance of ISG8R1, the NRC Office of Regulatory Research (RES) has directed an effort to
investigate the technical basis for extending the criteria and recommendations of ISG8R1 to allow

burnup credit criticality analysis iaea-tecdoc-1547 iaea regulations

A Coordinated U.S. Program to Address Full Burnup Credit in Transport and Storage Casks

A Coordinated U.S. Program to Address Full Burnup Credit in Transport and Storage Casks

Author(s)
Parks, C. V. ,
Wagner, J. C.
Publication Date

The benefits of burnup credit and the technical issues associated with utilizing burnup credit in spent
nuclear fuel (SNF) casks have been studied in the United States for almost two decades. The issuance of the
U.S. Nuclear Regulatory Commission (NRC) staff guidance for actinide-only burnup credit in 2002 was a
significant step toward providing a regulatory framework for using burnup credit in transport casks. However,
adherence to the current regulatory guidance (e.g., limit credit to actinides) enables only about 30% of the existing

burnup credit criticality analysis iaea-tecdoc-1547 iaea general
Disclaimer: Note that this page contains links to external sites. When leaving the CURIE site, please note that the U.S. Department of Energy and Pacific Northwest National Laboratory do not control or endorse the content or ads on these sites.
Sponsored by: