Category of Content

Siting Experience Documents Only

Publication Date

Keywords

Displaying 1 - 4 of 4

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

Author(s)
Nouri, A.
Publication Date
The OECD/NEA “Burn-up Credit Criticality Benchmark” working group has studied the effect of axial burn-up profile on the criticality of a realistic PWR spent fuel transport cask (Phase II-B). The final results of this benchmark are presented and analysed in this report. Nine basic cases and two additional accident configurations were considered with the following varying parameters: burn-up (0 GWd/t for fresh fuel, 30 and 50 GWd/t), fuel composition (actinides only and actinides with fifteen fission products), axial burn-up discretisation (1 or 9 zones).
criticality pwr fuel transport cask end effect source convergence burnup axial burnup profile

Japan’s Spent Fuel and Plutonium Management Challenges

Japan’s Spent Fuel and Plutonium Management Challenges

Author(s)
Tatsujiro Suzuki ,
Tadahiro Katsuta
Publication Date

Japan’s spent fuel management and fuel cycle programs are now at a critical stage. Its first commercial-scale reprocessing plant, at Rokkasho Village, will soon start full-scale operation.

spent fuel reprocessing plutonium recycling japan blue ribbon commission used fuel

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
DOE
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle benchmarks used fuel

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
Office of Civilian Radioactive Waste Management
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data benchmark safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle used fuel
Disclaimer: Note that this page contains links to external sites. When leaving the CURIE site, please note that the U.S. Department of Energy and Pacific Northwest National Laboratory do not control or endorse the content or ads on these sites.
Sponsored by: