Category of Content

Siting Experience Documents Only

Publication Date

Country

Keywords

Displaying 1 - 6 of 6

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

OECD/NEA Burnup Credit Criticality Benchmark, Analysis of Phase II-B Results: Conceptual PWR Spent Fuel Transportation Cask

Author(s)
Nouri, A.
Publication Date
The OECD/NEA “Burn-up Credit Criticality Benchmark” working group has studied the effect of axial burn-up profile on the criticality of a realistic PWR spent fuel transport cask (Phase II-B). The final results of this benchmark are presented and analysed in this report. Nine basic cases and two additional accident configurations were considered with the following varying parameters: burn-up (0 GWd/t for fresh fuel, 30 and 50 GWd/t), fuel composition (actinides only and actinides with fifteen fission products), axial burn-up discretisation (1 or 9 zones).
criticality pwr fuel transport cask end effect source convergence burnup axial burnup profile

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
DOE
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle benchmarks used fuel

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
Office of Civilian Radioactive Waste Management
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data benchmark safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle used fuel

Destructive Examination of 3-Cycle LWR Fuel Rods from Turkey Point Unit 3 for the CLIMAX-Spent Fuel Test

SED Publication Type

Destructive Examination of 3-Cycle LWR Fuel Rods from Turkey Point Unit 3 for the CLIMAX-Spent Fuel Test

Author
Atkin, S. D.
Publication Date

The destructive examination results of five light water reactor rods from the Turkey Point Unit 3 reactor are presented. The examinations included fission gas collection and analyses, burnup and hydrogen analyses, and a metallographic evaluation of the fuel, cladding, oxide, and hydrides. The rods exhibited a low fission gas release with all other results appearing representative for pressurized water reactor fuel rods with similar burnups (28 GWd/MTU) and operating histories.

spent fuel fission gas turkey point burnup used fuel

Public Values and Stakeholder Involvement - A New Framework for Performance Assessment

SED Publication Type

Public Values and Stakeholder Involvement - A New Framework for Performance Assessment

Author
Kjell Andersson ,
Stephane Chataignier ,
Britt-Marie Drottz Sjoberg ,
Daniel Galson ,
RISCOM
Publication Date

The objective of the RISCOM II project is to share the knowledge of the context of radioactive waste management in various European countries and to see to what extent it is possible to apply more widely the RISCOM Model (Andersson et al., 1998) in order to improve the acceptability of radioactive waste management. Thus, the project aims to promote the development of processes involving transparency, as well as means involving greater participation of the public.

siting europe riscom long-term disposal radioactive waste management
Disclaimer: Note that this page contains links to external sites. When leaving the CURIE site, please note that the U.S. Department of Energy and Pacific Northwest National Laboratory do not control or endorse the content or ads on these sites.
Sponsored by: