Category of Content
Siting Experience Documents Only
Publication Date
Subject Matter
Country
Keywords
EQ6 Calculations for Chemical Degradation of PWR LEU and PWR MOX Spent Fuel Waste Packages
EQ6 Calculations for Chemical Degradation of PWR LEU and PWR MOX Spent Fuel Waste Packages
Isotopic Generation and Verification of the PWR Application Model
Isotopic Generation and Verification of the PWR Application Model
The objective of this calculation is to establish an isotopic database to represent commercial spent nuclear fuel (CSNF) from pressurized water reactors (PWRs) in criticality analyses performed for the proposed Monitored Geologic Repository at Yucca Mountain, Nevada. Confirmation of the conservatism with respect to criticality in the isotopic concentration values represented by this isotopic database is performed as described in Section 3.5.3.1.2 of the Disposal Criticality Analysis Methodology Topical Report (YMP 2000).
Criticality Consequence Calculation Involving Intact PWR MOX SNF in a Degraded 21 PWR Assembly Waste Package
Criticality Consequence Calculation Involving Intact PWR MOX SNF in a Degraded 21 PWR Assembly Waste Package
The purpose of this calculation is to evaluate the transient behavior and consequences of a worst- case criticality event involving intact pressurized water reactor (PWR) mixed-oxide (MOX) spent nuclear fuel (SNF) in a degraded basket configuration inside a 21 PWR waste package (WP). This calculation will provide information necessary for demonstrating that the consequences of a worst-case criticality event involving intact PWR MOX SNF are insignificant in their effect on the overall radioisotopic inventory and on the integrity of the repository.
PWR Axial Burnup Profile Analysis
PWR Axial Burnup Profile Analysis
The purpose of this activity is to develop a representative “limiting” axial burnup profile for pressurized water reactors (PWRs), which would encompass the isotopic axial variations caused by different assembly irradiation histories, and produce conservative isotopics with respect to criticality. The effect that the low burnup regions near the ends of spent fuel have on system reactivity is termed the “end-effect”. This calculation will quantify the end-effects associated with Pressurized Water Reactor (PWR) fuel assemblies emplaced in a hypothetical 21 PWR waste package.
Criticality Consequence Analysis Involving Intact PWR SNF in a Degraded 21 PWR Assembly Waste Package
Criticality Consequence Analysis Involving Intact PWR SNF in a Degraded 21 PWR Assembly Waste Package
The purpose of this analysis is to evaluate the transient behavior and consequences of a worst case criticality event involving intact pressurized water reactor (PWR) spent nuclear fuel (SNF) in a degraded basket configuration inside a 21 PWR assembly waste package (WP). The objective of this analysis is to demonstrate that the consequences of a worst case criticality event involving intact PWR SNF are insignificant in their effect on the overall radioisotopic inventory in a WP. An internal WP criticality is modeled in a manner analogous to transient phenomena in a nuclear reactor core.
PWR Axial Burnup Profile Analysis
PWR Axial Burnup Profile Analysis
The purpose of this activity is to develop a representative “limiting” axial burnup profile for pressurized water reactors (PWRs), which would encompass the isotopic axial variations caused by different assembly irradiation histories, and produce conservative isotopics with respect to
3rd WP Probabilistic Criticality Analysis: Methodology for Basket Degradation with Application to Commercial SNF
3rd WP Probabilistic Criticality Analysis: Methodology for Basket Degradation with Application to Commercial SNF
This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development (WPD) department to describe the latest version of the probabilistic criticality analysis methodology and its application to the entire commercial waste stream of commercial pressurized water reactor (PWR) spent nuclear fuel (SNF) expected to be emplaced in the repository. The purpose of this particular application is to evaluate the 21 assembly PWR absorber plate waste package (WP) with respect to degradedmode criticality performance.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report of the Commonwealth of Australia
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report of the Commonwealth of Australia
This is the fourth National Report by Australia.1 The 2008 National Report and Australia’s presentation to the Third Review Meeting in 2009 highlighted the following major issues:
• progress on national uniformity;
• progress with development of a national waste classification scheme;
• radioactive waste management policy – achievements, consultation, strategy;
• spent fuel management and management of reprocessing waste;
• decommissioning;
• uranium mining waste management; and
• recruitment and skills management.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report from the Commonwealth of Australia, October 2008
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report from the Commonwealth of Australia, October 2008
This is the third National Report by Australia1. The 2005 National Report and Australia’s presentation to the Second Review Meeting in 2006 highlighted issues as to how each of the nine Australian jurisdictions within Australia’s federal system are complying with the Joint Convention. A challenge identified for Australia in the Rapporteur’s Report for Country Group 3 was “ensuring a coherent approach to regulations and waste management practice in view of the complex nature of national and regional legislation”.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, October 2005
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, October 2005
The responsibility for the governance of Australia is shared by the Australian government and the governments of the six states and two self governing territories. Responsibility for radiation health and safety in each State and Territory rests with the respective State/Territory government, unless the activity is carried out by an Australian government agency or a contractor to a Australian government agency; in those cases the activity is regulated by the Australian government.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, July 2003
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, July 2003
The responsibility for the governance of Australia is shared by Australia's federal government (also known as the Commonwealth government) and the governments of the six states and two self governing territories. Responsibility for radiation health and safety in each State and Territory rests with the respective State/Territory government, unless the activity is carried out by a Commonwealth agency or a contractor to a Commonwealth agency; in those cases the activity is regulated by the Federal government (Commonwealth government of Australia).
Joint Convention Responses to Questions Posted to Australia in 2009
Joint Convention Responses to Questions Posted to Australia in 2009
Joint Convention Responses to Questions Posted to Australia in 2009