Analysis of Dust Deliquescence for FEP Screening
| Attachment | Size |
|---|---|
| ANL-EBS-MD-000074 REV 01 ADD 01.pdf (7.5 MB) | 7.5 MB |
| ANL-EBS-MD-000074 REV 01 ACN 01.pdf (473.54 KB) | 473.54 KB |
| ANL-EBS-MD-000074 REV 01 ADD 01 ACN 02.pdf (479.25 KB) | 479.25 KB |
| ANL-EBS-MD-000074 REV 01 ADD 01 ERD 01.pdf (700.83 KB) | 700.83 KB |
| ANL-EBS-MD-000074 REV 01 ADD 01 ERD 02.pdf (1020.59 KB) | 1020.59 KB |
The purpose of this report is to evaluate the potential for penetration of the Alloy 22 (UNS N06022) waste package outer barrier by localized corrosion due to the deliquescence of soluble constituents in dust present on waste package surfaces. The results support a recommendation to exclude deliquescence-induced localized corrosion (pitting or crevice corrosion) of the outer barrier from the total system performance assessment for the license application (TSPA-LA).
Preparation of this report, and supporting laboratory studies and calculations, were performed as part of the planned effort in Work Package AEBM21, as implemented in Technical Work Plan for: Screening Evaluation for Dust Deliquescence and Localized Corrosion (BSC 2004 [DIRS 172804]), by Bechtel SAIC Company, LLC, and staff from three national laboratories: Sandia National Laboratories, Lawrence Livermore National Laboratory (LLNL), and Lawrence Berkeley National Laboratory (LBNL).
The analysis and conclusions presented in this report are quality affecting, as determined in the controlling technical work plan. A summary of background information, based on work that was not performed under a quality assurance program, is provided as Appendix E. In this instance, the use of unqualified information is provided for transparency and corroboration only, and is clearly separated from uses of qualified information. Thus, the qualification status of this information does not affect the conclusions of this report.
