The purpose of this report is to document the thermal-hydrologic-chemical (THC) seepage model and model simulations. The simulations predict the composition of fracture water that could potentially seep into repository emplacement drifts and the composition of the associated gas phase. The THC seepage model is not used to feed the total system performance assessment (TSPA) for the license application (LA).
The purpose of this report is to <,locument the sensitivity of the drift-scale thermal-hydrologic- chemical (THC) seepage model (SNL 2007 [DIRS 177404]) to heterogeneities in permeability and capillarity, which could affect predicted fluxes and chemistries of water and gases seeping into the emplacement drifts. This report has been developed following Technical Work Plan for: Revision of Model Reports for Near-Field and In-Drift Water Chemistry (SNL 2007 [DIRS 179287]).
The objective of this analysis is to characterize a codisposal canister containing MIT or ORR fuel in the Five-Pack Defense High-Level Waste (5-DHLW) Waste Package (WP) to demonstrate concept viability related to use in the Mined Geologic Disposal System (MGDS) environment for the postclosure time frame. The purpose of this analysis is to investigate the disposal criticality and shielding issues for the DHLW WP and establish DHLW WP and codisposal canister compatibility with the MGDS, and to provide criticality and shielding evaluations for the preliminary DHLW WP design.
The objective of this calculation is to perform additional degraded mode criticality evaluations of the Department of Energy's (DOE) Fast Flux Test Facility (FFTF) Spent Nuclear Fuel (SNF) codisposed in a 5-Defense High-Level Waste (5-DHLW) Waste Package (WP). The scope of this calculation is limited to the most reactive degraded configurations of the codisposal WP with an almost intact Ident-69 container (breached and flooded but otherwise non-degraded) containing intact FFTF SNF pins.
The purpose of this calculation is to perform waste-form specific nuclear criticality safety calculations to aid in establishing criticality safety design criteria, and to identify design and process parameters that are potentially important to the criticality safety of Department of Energy (DOE) standardized Spent Nuclear Fuel (SNF) canisters.
The purpose of this document is to summarize the degraded waste package disposal criticality evaluations which were performed in fiscal years I995 and I996. These evaluations were described in detail in 4 previous documents (Refs. I through 4). The initial version of this summary has been described in the I996 Disposal Criticality Analysis Methodology Technical Report (Ref. 5). A topical report planned for 1998 will present the methodology in its final form for approval by the US Nuclear Regulatory Commission.
The purpose of this document is to present the methodology to be used for development of the Subcritical Limit (SL) for post closure conditions for the Yucca Mountain repository. The SL is a value based on a set of benchmark criticality multiplier, keff> results that are outputs of the MCNP calculation method. This SL accounts for calculational biases and associated uncertainties resulting from the use of MCNP as the method of assessing kerr·
The purpose of this calculation is to evaluate the transient behavior and consequences of a worst- case criticality event involving intact pressurized water reactor (PWR) mixed-oxide (MOX) spent nuclear fuel (SNF) in a degraded basket configuration inside a 21 PWR waste package (WP). This calculation will provide information necessary for demonstrating that the consequences of a worst-case criticality event involving intact PWR MOX SNF are insignificant in their effect on the overall radioisotopic inventory and on the integrity of the repository.
The purpose of this design analysis is to determine the accuracy of the SAS2H module of SCALE 4.3 in predicting isotopic concentrations of spent fuel assemblies. The objective is to develop a methodology for modeling assemblies similar to those evaluated within this analysis and to establish the consistency of SAS2H predictions. The results of this analysis may then be applied to future depletion calculations using SAS2H in which no measurements are available.
The purpose of this calculation is to perform criticality evaluations for mixed oxide spent nuclear fuel in 12 and 21 pressurized water reactor waste packages for both intact and degraded configurations. The MOX assembly design considered in previous studies on Pu disposition in commercial reactors is based on the Westinghouse 17x17 Vantage 5 assembly (Ref. 7.2). Depletion analyses of four Pu enrichment and burnup(expressed as gigawatt days/metric ton heavy metal; GWd/MTHM)) combinations were performed in Ref. 7.4.
