Skip to main content

Radioactive Waste Repository Licensing, Synopsis of a Symposium, Executive Summary

This book recounts the issues raised and the viewpoints aired at a recent symposium on
repository licensing. It summarizes the problems surrounding the setting of an
Environmental Protection Agency standard for the release of radionuclides and the
regulatory problems inherent in meeting such a standard. Symposium participants came
from a variety of federal agencies and advisory groups, state governments, public interest
groups, engineering firms, national laboratories, and foreign and international
organizations.

SCALE-4 Analysis of Pressurized Water Reactor Critical Configurations: Volume 1-Summary

The requirements of ANSI/ANS 8.1 specify that calculational methods for away-from-reactor
criticality safety analyses be validated against experimental measurements. If credit is to be taken for
the reduced reactivity of burned or spent fuel relative to its original $fresh# composition, it is
necessary to benchmark computational methods used in determining such reactivity worth against
spent fuel reactivity measurements. This report summarizes a portion of the ongoing effort to

One Step at a Time: The Staged Development of Geologic Repositories for High-Level Radioactive Waste - Summary

A new report from the National Academies proposes a management approach called “adaptive staging” as a promising means to develop geologic repositories for high-level waste such as the proposed repository at Yucca Mountain, Nevada. Adaptive staging is a learn-as-you-go process that enables project managers to continuously reevaluate and adjust the program in response to new knowledge and stakeholder input.

Waste Acceptance System Requirements Document, Revision 5, ICN 01

The purpose of this document is to establish waste acceptance technical requirements for the U.S. Department of Energy’s (DOE) Civilian Radioactive Waste Management System (CRWMS). These requirements and functions consist of two types: (a) internal CRWMS requirements derived from the Civilian Radioactive Waste Management System Requirements Document (CRD) (DOE 2007a) as illustrated in Figure 1, and (b) acceptance criteria imposed by the CRWMS on spent nuclear fuel (SNF) and high-level waste (HLW) delivered into the CRWMS.

Commercial Spent Nuclear Fuel Waste Package Misload Analysis

The purpose of this calculation is to estimate the probability of misloading a commercial spent
nuclear fuel waste package with a fuel assembly(s) that has a reactivity (i.e., enrichment and/or
burnup) outside the waste package design. The waste package designs are based on the expected
commercial spent nuclear fuel assemblies and previous analyses (Macheret, P. 2001, Section 4.1
and Table 1). For this calculation, a misloaded waste package is defined as a waste package that

Computational Benchmark for Estimation of Reactivity Margin from Fission Products and Minor Actinides in PWR Burnup Credit

This report proposes and documents a computational benchmark problem for the estimation of the additional reactivity margin available in spent nuclear fuel (SNF) from fission products and minor actinides in a burnupcredit storage/transport environment, relative to SNF compositions containing only the major actinides. The benchmark problemlconfiguration is a generic burnup credit cask designed to hold 32 pressurized water reactor (PWR) assemblies.

Calculation Method for the Projection of Future Spent Nuclear Fuel Discharges

This report describes the calculation method developed for the projection of future utility spent nuclear fuel (SNF) discharges in regard to their timing, quantity, burnup, and initial enrichment. This projection method complements the utility-supplied RW-859 data on historic discharges and short-term projections of SNF discharges by providing long-term projections that complete the total life cycle of discharges for each of the current U.S. nuclear power reactors.

Historical Summary of the Three Mile Island Unit 2 Core Debris Transportation Campaign

Transport of the damaged core materials from the Unit 2 reactor of the Three
Mile Island Nuclear Power Station (TMI-2) to the Idaho National Engineering Laboratory
(INEL) for examination and storage presented many technical and institutional
challenges, including assessing the ability to transport the damaged core;
removing and packaging core debris in ways suitable for transport; developing a
transport package that could both meet Federal regulations and interface with the

Nuclear Waste Bill Feedback

On April 25, 2013, Senators Wyden, Alexander, Feinstein, and Murkowski released a draft bill to create a sustainable, participatory process for managing nuclear waste. The senators requested comments and suggestions on the draft bill, as well as on the alternative language for siting an interim storage facility proposed by Senators Alexander and Feinstein. In addition, the senators posed eight questions on which they sought comments.

Disclaimer: Note that this page contains links to external sites. When leaving the CURIE site, please note that the U.S. Department of Energy and Pacific Northwest National Laboratory do not control or endorse the content or ads on these sites.