Category of Content
Siting Experience Documents Only
Publication Date
Country
Keywords
Probabilistic External Criticality Evaluation (SCPB: N/A)
Probabilistic External Criticality Evaluation (SCPB: N/A)
This analysis is prepared by the Mined Geologic Disposal System (MGDS) Waste Package Development (WPD) department to provide a probabilistic evaluation of the potential for criticality of fissile material which has been transported from a geologic repository containing breached waste packages of commercial spent nuclear fuel (SNF). This analysis is part of a continuing investigation of the probability of criticality resulting from the emplacement of spent nuclear fuel in a geologic repository.
Geochemistry Model Validation Report: External Accumulation Model
Geochemistry Model Validation Report: External Accumulation Model
The purpose of this report is to document and validate the external accumulation model that predicts accumulation of fissile materials in the invert, fractures and lithophysae in the rock beneath a degrading waste package containing spent nuclear fuel (SNF) in the monitored geologic repository at Yucca Mountain. (Lithophysae are hollow, bubblelike structures in the rock composed of concentric shells of finely crystalline alkali feldspar, quartz, and other materials (Bates and Jackson 1984 [DIRS 128109], p.
EQ6 Calculations for Chemical Degradation of Pu-Ceramic Waste Packages
EQ6 Calculations for Chemical Degradation of Pu-Ceramic Waste Packages
In this study, the long-term geochemical behavior of waste package (WP), containing Pu-ceramic, was modeled. The ceramic under consideration contains Ti, U, Pu, Gd and Hf in a pyrochlore structure; the Gd and Hf stabilize the mineral structure, but are also intended to provide criticality control. The specific study objectives were to determine:
1) the extent to which criticality control material, suggested for this WP design, will remain in the WP after corrosion/dissolution of the initial package configuration (such that it can be effective in preventing criticality), and
Analysis of Critical Benchmark Experiments for Configurations External to WP
Analysis of Critical Benchmark Experiments for Configurations External to WP
The Disposal Criticality Analysis Methodology Topical Report (Reference 1) states that the accuracy of the criticality analysis methodology (MCNP Monte Carlo code and cross-section data) designated to assess the potential for criticality of various configurations in the Yucca Mountain proposed repository is established by evaluating appropriately selected benchmark critical experiments.
Preliminary Criticality Analysis of Degraded SNF Accumulations External to a Waste Package (SCPB: N/A)
Preliminary Criticality Analysis of Degraded SNF Accumulations External to a Waste Package (SCPB: N/A)
This study is prepared by the Mined Geologic Disposal System (MODS) Waste Package Development Department (WPDD) to provide input to a separate evaluation on the probablility of criticality in the far- field environment. These calculations are performed in sufficient detail to provide conservatively bounding configurations to support separate probabilistic analyses.
Report On External Criticality of Plutonium Waste Forms In A Geologic Repository
Report On External Criticality of Plutonium Waste Forms In A Geologic Repository
This report presents the analyses and results for the potential occurrence of external criticality events which could result from plutonium waste forms emplaced in a geologic repository similar to the one being developed at Yucca Mountain. The analyses evaluate both the MOX spent fuel and the immobilized plutonium waste forms in a repository if the waste package has degraded and if the fissile material has migrated to the invert and out into the far-field.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report of the Commonwealth of Australia
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report of the Commonwealth of Australia
This is the fourth National Report by Australia.1 The 2008 National Report and Australia’s presentation to the Third Review Meeting in 2009 highlighted the following major issues:
• progress on national uniformity;
• progress with development of a national waste classification scheme;
• radioactive waste management policy – achievements, consultation, strategy;
• spent fuel management and management of reprocessing waste;
• decommissioning;
• uranium mining waste management; and
• recruitment and skills management.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report from the Commonwealth of Australia, October 2008
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, National Report from the Commonwealth of Australia, October 2008
This is the third National Report by Australia1. The 2005 National Report and Australia’s presentation to the Second Review Meeting in 2006 highlighted issues as to how each of the nine Australian jurisdictions within Australia’s federal system are complying with the Joint Convention. A challenge identified for Australia in the Rapporteur’s Report for Country Group 3 was “ensuring a coherent approach to regulations and waste management practice in view of the complex nature of national and regional legislation”.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, October 2005
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, October 2005
The responsibility for the governance of Australia is shared by the Australian government and the governments of the six states and two self governing territories. Responsibility for radiation health and safety in each State and Territory rests with the respective State/Territory government, unless the activity is carried out by an Australian government agency or a contractor to a Australian government agency; in those cases the activity is regulated by the Australian government.
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, July 2003
Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management, Australian National Report, July 2003
The responsibility for the governance of Australia is shared by Australia's federal government (also known as the Commonwealth government) and the governments of the six states and two self governing territories. Responsibility for radiation health and safety in each State and Territory rests with the respective State/Territory government, unless the activity is carried out by a Commonwealth agency or a contractor to a Commonwealth agency; in those cases the activity is regulated by the Federal government (Commonwealth government of Australia).
Joint Convention Responses to Questions Posted to Australia in 2009
Joint Convention Responses to Questions Posted to Australia in 2009
Joint Convention Responses to Questions Posted to Australia in 2009