Category of Content

Siting Experience Documents Only

Publication Date

Keywords

Displaying 1 - 4 of 4

WHF and RF Thermal Evaluation

WHF and RF Thermal Evaluation

Author(s)
Bechtel SAIC Company, LLC
Publication Date
The purpose of this analysis is to estimate the peak fuel assembly cladding temperature within the transportation casks that will be received in the WHF and RF, and to compare this value with established temperature limits. Thermally limiting scenarios are evaluated for both normal and off-normal operating conditions, with the off-normal condition defined as a loss of active ventilation. A second purpose of this analysis is to identify a specific room in the surface facilities as thermally limiting of all the rooms, with respect to the potentially highest temperatures on the concrete walls.
thermal analysis transportation yucca mountain heat load

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
DOE
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle benchmarks used fuel

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Topical Report on Actinide-Only Burnup Credit for PWR Spent Nuclear Fuel Packages

Author(s)
Office of Civilian Radioactive Waste Management
Publication Date

A methodology for performing and applying nuclear criticality safety calculations, for PWR spent nuclear fuel (SNF) packages with actinide-only burnup credit, is described. The changes in the U-234, U-235, U-236, U-238, Pu-238, Pu-239, Pu-240, Pu-241, Pu-242, and Am-241 concentration with burnup are used in burnup credit criticality analyses. No credit for fission product neutron absorbers is taken. The methodology consists of five major steps. (1) Validate a computer code system to calculate isotopic concentrations of SNF created during burnup in the reactor core and subsequent decay.

criticality spent fuel fission products cross-section data benchmark safety code cooling time decay design multiplication factors neutron absorbers reactor cores nuclear fuel burnup nuclear fuel cycle used fuel
Disclaimer: Note that this page contains links to external sites. When leaving the CURIE site, please note that the U.S. Department of Energy and Pacific Northwest National Laboratory do not control or endorse the content or ads on these sites.
Sponsored by: